FCC Robot Ban: What Small Manufacturers Using AMRs and AGVs Must Do

Executive Summary

  • The FCC robot ban took effect July 28, 2026. New models of foreign produced mobile robots, including autonomous mobile robots (AMRs), humanoids and quadrupeds, can no longer receive the FCC equipment authorization they need to be imported, marketed or sold in the United States. A new covered model generally cannot enter the US market unless it obtains a Department of War Conditional Approval and then satisfies the applicable FCC equipment authorization requirements.
  • The FCC says automated guided vehicles (AGVs) “may” be covered even when they follow predefined paths. Fixed, stationary robot arms are excluded, but a robot arm mounted on a mobile base is a different question.
  • Robots you already own can keep running. Models authorized before July 28 can still be imported and sold, and a waiver lets them receive software and firmware updates until at least January 1, 2029. The waiver does not cover non identical hardware changes, and it does not oblige vendors to supply updates.
  • “Foreign produced” follows the Buy American domestic end product test: made in the United States with more than 65 percent domestic component cost through 2028, rising to 75 percent in 2029. A US brand made overseas is covered.
  • For a small manufacturer, the practical work is an inventory of every mobile robot, a vendor question list, a hold on unapproved new models, and a risk review of the robot’s software, data and update channel, which is exactly the threat model the government used to justify the listing.

1. What is the FCC robot ban, and what changed on July 28, 2026?

The FCC robot ban is the shorthand for the Federal Communications Commission’s July 28, 2026 decision to add “foreign produced advanced robotic devices” to its Covered List, which blocks new models of those robots from receiving FCC equipment authorization. Without that authorization, a new model generally cannot be imported, marketed or sold in the United States. The action came through Public Notice DA 26-786, released the day after a White House convened interagency body sent the FCC a national security determination on robots.

The FCC robot ban is a block on new foreign produced models of mobile robots, such as AMRs, AGVs, humanoids and quadrupeds, from receiving FCC equipment authorization after July 28, 2026. Robots already authorized can still be used, imported and sold, and a new covered model generally needs a Department of War Conditional Approval plus FCC authorization.

For a small manufacturer, this is not an abstract trade story. The determination itself names “industrial manufacturing, from material handling to order fulfilment” as a use case, and the FCC has said in writing that AGVs may fall inside the definition. If your plant moves material with mobile robots, or you were planning to buy them in 2027, the rule changes what you can buy, what your vendor can change, and what questions you need answered before you sign.

The headline label overstates it in one respect. The FCC’s own FAQ on robots and power inverters, last updated October 27, 2026, says being added to the Covered List “does not prohibit the import, sale, or use of any existing device models the FCC previously authorized.” It is an equipment authorization restriction, not a recall and not a ban on owning or operating foreign robots. The research firm IDC described it as “a chokepoint, not a wall,” which is a fair summary for a buyer.

2. Which robots does the FCC robot ban cover?

The FCC robot ban covers any mechanical mobile device, including AMRs, humanoids and quadrupeds, that meets four tests in the National Security Determination of July 27, 2026, which the FCC adopted word for word. All four must be met. The device must be capable of locomotion, obstacle avoidance, navigation or movement on the ground. It must operate at a distance from a human operator or supervisor based on commands, sensor data or both. Its combined weight with any docking or ground station must be over 4.4 pounds.

The fourth test is a component test, and it is where most industrial robots are caught. The device must contain all three of a sensor capable of perceiving its environment, a network connection (wired or wireless, including Bluetooth, WiFi, cellular or satellite) of at least 200 kbps in either direction, and software “including firmware and AI or machine-learning model weights” that controls autonomous navigation, perception, data collection or remote command and control. That last phrase matters for this series: the government wrote AI model weights directly into the definition of the regulated product. The definition does not require a robot to use AI, however. Conventional control software can satisfy the software element, so removing an AI feature does not take a robot out of scope.

Six categories are excluded. They are connected vehicles as defined in 15 CFR 791.301, vehicles that run only on a rail line, drones (which have their own Covered List entry), unmanned underwater vehicles, FDA classified medical devices, and “a fixed, stationary, non-mobile robot, including articulating, parallel/delta, Cartesian/gantry” and SCARA robots intended for industrial or medical use. The comparison below sorts the equipment a typical small plant actually runs.

Equipment Likely status if foreign produced Why
Fixed six axis arm, SCARA or gantry in a cell Excluded Express exclusion for fixed, stationary, non mobile industrial robots
Collaborative arm bolted to a bench Excluded Same fixed robot exclusion; collaboration does not change mobility
Autonomous mobile robot (AMR) for material transport Generally within the definition if all elements are met and no exclusion applies AMRs are named in the definition, but the label alone does not settle the weight, connectivity and software tests
AGV following floor tape or magnets May be covered FCC FAQ: AGVs “may fall within the definition” even on predefined paths
Arm mounted on a mobile base (mobile manipulator) Generally within the definition if all elements are met Mobility brings it outside the fixed robot exclusion; ABB obtained a Conditional Approval for its mobile manipulators
Overhead or rail guided transfer cart Excluded only if rail only FCC calls the rail exception “a narrow one”
Autonomous floor scrubber or security robot Generally within the definition if all elements are met and no exclusion applies Typically ground mobile, sensor equipped and networked; a robotic floor cleaner maker has already obtained a Conditional Approval
Bare mobile platform with no sensors, compute or radio Not covered as imported FCC FAQ: fails the component test as imported, but later integration can bring the finished product into scope

Treat the “likely” and “may” rows as our reading of the definition and the FAQ, not as an FCC ruling on any specific product. The determination is short and the FCC has answered questions one FAQ at a time. When the answer matters to a purchase, ask the vendor for its own written position and the FCC authorization record for the exact model.

3. Are the AGVs and AMRs on your floor covered?

New foreign produced AMR models are covered, and AGVs may be covered even if they only follow a fixed route. The FCC’s FAQ answers the AGV question directly: AGVs “may fall within the definition of ‘advanced robotics devices,’ even if they follow predefined paths, because they ‘operate[] at a distance from a human operator or supervisor based on commands or in response to sensor data or any combination thereof.'” A tape following tugger with a safety scanner and a WiFi link to a fleet manager can meet every element.

Intel shows how seriously large manufacturers took that sentence. On October 16, 2026, Intel petitioned the FCC about AGVs it uses in its US semiconductor plants. According to the FCC’s order, Intel stated that it was unclear whether those AGVs were covered and sought relief “out of an abundance of caution.” The FCC’s Office of Engineering and Technology granted relief six days later in Order DA 26-1146. The order records Intel’s statements that replacing the vehicles would take years and that there were no proven domestic alternatives meeting its requirements.

The rail exception will not save most floor vehicles. The FCC says it believes the rail line exclusion “is a narrow one”: a vehicle “only capable of operating or moving on rail lines” is excluded, but anything that can move along the ground without defined rails is not. In our reading, magnetic tape, painted lines and QR code grids are not rails; the FCC has not addressed them by name.

Two edge cases matter to integrators and small machine builders. First, a mechanical platform imported with no compute, sensors or radio is not covered, but the FCC warns that adding components that emit radio frequency energy to such a platform would make it covered equipment. Assess the finished configuration against the complete definition, and assess whether the finished product is domestic under the production test in section 5. Importing a bare chassis is not a reliable route around the rules. Second, FCC rules at 47 CFR 2.1204(a)(3) still let you import small batches of unauthorized devices solely for product development or testing, as long as they are not marketed or sold.

4. Can you keep using, buying and repairing robots you already have?

Yes, you can keep using robots you already have, and you can keep buying models that were authorized before July 28, 2026. The FCC says the listing does not affect “the continued importing, marketing, or selling of existing models” that already hold equipment authorization, or the continued use of devices already in service. The FCC also says there is “no direct restriction on the operation” of covered robots that already received authorization.

Updates are the part most buyers miss. A rule change that took effect in December 2025 removed Covered List equipment from the permissive change process, which is how manufacturers normally push changes to authorized equipment. Once robots were listed, those permissive change restrictions created an obstacle to otherwise permissible updates, including security patches, so the FCC issued a waiver the same day: Public Notice DA 26-789 lets authorized robots “continue to receive software and firmware updates that mitigate harm to U.S. consumers at least until January 1, 2029,” including updates that patch vulnerabilities and maintain compatibility. The waiver permits qualifying updates; it does not require vendors to supply them or guarantee that every feature upgrade is covered.

Hardware is narrower. The FCC says its rules do not prohibit repairs of already authorized devices or “the replacement of component parts with identical parts.” A different radio module, a newer navigation computer or an upgraded sensor is a non identical hardware modification. It needs a configuration specific authorization analysis; do not assume the software waiver covers it, and separate relief, such as a waiver or a Conditional Approval, may be necessary. That is exactly what Intel asked for, and its relief is specific: it covers only the vehicles listed in a confidential appendix, for one year, on Intel’s representation that the robots stay inside its facilities, will not be marketed, will not gain improved RF performance or new capabilities, and will not swap a US made part for a foreign one.

GOVERNANCE INSIGHT

Your fleet’s update permissions depend on the type of change and the scope of the relief.

The software and firmware waiver runs to at least January 1, 2029, and the FCC extended earlier drone and router waivers, but nothing guarantees it will be extended again. Non identical hardware changes need their own analysis and possibly separate relief; Intel’s hardware relief, for example, runs only one year and covers only named vehicles. Put both facts into your maintenance plan now: stock identical spares for critical components, ask the vendor how long it will support each model, and record which future changes would need FCC relief.

One more reassurance and one caution. The FCC’s Covered List page shows a separate process, under 47 CFR 2.939(e), that can stop further importation or marketing of previously authorized covered equipment after a public notice, at least 30 days of comment and a public interest analysis. As of the page’s November 6, 2026 update, that process has been applied only to equipment added to the list in 2024 or earlier, not to robots. It is a lever that exists, not one that has been pulled.

5. What does “foreign produced” mean for a US branded robot?

A robot is “foreign produced” unless it qualifies as a “domestic end product” under the federal Buy American rule in 48 CFR 25.101(a), and the nationality or brand of the company selling it is irrelevant. The FCC’s FAQ spells out two prongs: the device must be “manufactured in the United States,” and the cost of domestic components must exceed 65 percent for items delivered in calendar years 2024 through 2028, rising to 75 percent for items delivered starting in 2029.

Three consequences follow for buyers. An American company that builds its robots overseas is covered, because the FCC says the nationality of the producer “is not relevant.” A foreign company that assembles robots in a qualifying US plant may fall outside the rule. And commercially available off the shelf (COTS) components get no special treatment: the FCC says “all components, including COTS components, must be considered” in the 65 percent calculation.

The bar also moves. A robot whose domestic component cost exceeds 65 percent may not exceed 75 percent. The 2029 threshold matters to the domestic product assessment for items delivered from 2029; its effect on a particular previously authorized model should be reviewed alongside grandfathering and any Conditional Approval. If a vendor tells you its product is “made in USA” and therefore unaffected, ask for the basis of that claim against both thresholds. The FCC says applicants for authorization must certify the device is not covered equipment and must have sufficient evidence to support that certification, though no specific documentation is prescribed.

6. How does FCC Conditional Approval work, and which robots have it?

A Conditional Approval is a specific determination by the Department of War that a given foreign produced robot, or class of robots, does not pose unacceptable risks, and it restores the robot’s eligibility for FCC authorization. It is not itself an equipment authorization: the product must still satisfy the applicable FCC certification or Supplier’s Declaration of Conformity requirements. The Department of War is a secondary title for the Department of Defense authorized by Executive Order 14347 in September 2025; it is the same agency. The Annex A application guidance says applications must be submitted by January 1, 2028, as a machine readable PDF to the FCC, which forwards them to the Department.

The application is heavy, and it is a producer’s filing, not a buyer’s. It asks for the full ownership structure and every beneficial owner holding 5 percent or more; board members and executives with nationality and residence; a detailed bill of materials; country of origin for every component, the design and the onboard software and firmware; the entities responsible for IP ownership and software updates; a quantitative supply chain concentration analysis; single points of failure; and a detailed plan, with a timeline, to establish or expand US manufacturing, with a named office that reports progress once a quarter and committed investments over the next 1 to 5 years. A corporate officer must certify the submission, and the guidance says all decisions are final.

The FCC says “any entity involved in producing the device can apply,” and approvals can cover a class of robots rather than one model. In practice that means your role as a buyer is to ask, not to apply. As of the FCC’s Covered List page update of November 6, 2026, there were 15 Conditional Approval listings for advanced robotic devices. These are listings, not individual models; we counted them on the FCC page on November 9, 2026, and the two newest, for ABB Robotics and Pantograph Industries, also appear in Public Notice DA 26-1203 of November 6.

Date listed by FCC Approvals relevant to factories and warehouses (selected)
September 18, 2026 ANSCER Robotics AR250, AR650 and AR1250 robotic platforms
October 16, 2026 Volley Automation AGVs and AMRs
October 23, 2026 T-Robotics Co., Ltd., entire product class of AGVs
October 30, 2026 OMRON LD-150 and LD-300 platforms; ATI Motors Sherpa tuggers, FlexFork forklifts and Sherpa Mecha; ARAPL autonomous pallet trucks and counterbalance forklifts
November 6, 2026 ABB Robotics autonomous mobile manipulators AMMR G0540 and G1240 and AMR model P204V

Read the list carefully before relying on it. Approvals name specific models or product classes, so a vendor’s approval for one platform does not cover its next one. Check each approval’s scope, conditions, duration and onshoring obligations, and do not assume terms stated for another Covered List category apply; the FCC page’s note on approvals without a termination date refers to drone approvals. The robot application guidance itself requires prompt disclosure of material changes and says an approval will be terminated for knowing violations or material misrepresentations. Check the FCC Covered List page on the day you issue a purchase order, not the day you got the quote.

7. What does the October 28 robotics proclamation add?

The October 28, 2026 proclamation adds trade pressure but no new tariff yet. In Adjusting Imports of Robotics, Industrial Machinery, and Their Parts and Components Into the United States, the President concurred with a Commerce Department finding under section 232 of the Trade Expansion Act of 1962 that these imports “threaten to impair the national security,” and directed Commerce and the US Trade Representative to negotiate agreements with trading partners.

The proclamation’s reach is wider than the FCC rule. The FCC listing covers mobile robots only, while the proclamation covers “robotics, industrial machinery, and their components,” which includes the fixed arms and machine tools the FCC excluded. Commerce and USTR must report on the negotiations within 180 days, which lands in late April 2027. Depending on the outcome, the proclamation says the President “may consider alternative remedies in the future, including imposing or modifying tariffs, duties, quotas, and fees,” and a program to incentivize US production.

For a small manufacturer planning 2027 capital spending, that means two separate risks on the same quote: an authorization risk on new mobile robot models today, and a possible price risk on robots and machinery generally during or following the negotiations. The 180 day date is a reporting deadline, not a promise that nothing happens before it. Law firms including Sidley have read the proclamation the same way: trade talks now, tariffs held in reserve. Neither risk is a reason to panic buy. Both are reasons to put price adjustment, substitution and authorization warranties into the purchase contract.

Getting your AI governance in order

Dynamic Comply helps small and medium sized businesses build a real AI governance foundation using the NIST AI RMF and ISO/IEC 42001.

Start the free AI maturity self assessment

8. Why is the FCC robot ban an AI governance problem, not only a purchasing problem?

The FCC robot ban is an AI governance problem because the government’s stated reason for it is the risk inside the robot’s software, data and update channel, and those risks sit on your plant floor whether or not your robot is foreign made. The determination says advanced robots are “inherently networked systems which creates broad attack surfaces,” leaving them vulnerable to “data exfiltration, remote disruption of the physical robot, and dependencies on unsecure over the air updates.”

The determination’s evidence reads like a risk register. It cites a 2026 vulnerability that let one person remotely access thousands of home robots, with live camera feeds, microphone audio and detailed maps; a flaw in certain humanoids that let an attacker take over a robot and spread to nearby units; and an April 2025 report of a possible pre installed backdoor in quadrupeds. It warns that LiDAR, thermal and acoustic sensors let a robot build detailed maps of the environment in which it operates, and that buyers of foreign robots have “limited visibility into the development practices and software provenance.”

Swap “foreign” for “any vendor” and you have the questions a buyer should ask about every AI driven machine. What data does the robot collect about your floor layout, product and people? Where does it go, and who can send commands to the fleet? Who signs the updates, and can you defer one? What model or navigation stack makes the decisions, and what happens when it fails? The FCC’s FAQ notes that the Cybersecurity and Infrastructure Security Agency encourages organizations to use the Covered List itself in their risk management analysis.

The governance frameworks already have a place for this. The NIST AI Risk Management Framework asks organizations to map third party AI components and their risks; ISO/IEC 42001 asks for documented controls over AI suppliers and the AI system lifecycle. On the safety side, A3’s director of standards development has explained that under ANSI/A3 R15.06-2025 a robot cell that is modified, relocated or redeployed needs a new risk assessment, and that R15.08 for industrial mobile robots extends that thinking to aisles, traffic and shared spaces. If the Covered List pushes you to substitute a mobile robot vendor, that substitution should trigger the applicable machinery safety assessment and your internal cybersecurity and AI supplier review. These standards are voluntary consensus documents, and their legal and contractual reach is separate from the FCC listing.

This also connects to what your own customers are asking. Our earlier piece on Tier 1 AI questionnaires for small manufacturers showed that larger customers increasingly want to know what AI runs in a supplier’s process. A mobile robot fleet with an unknown update channel is now an answer you need to be able to give.

9. What other Covered List changes should manufacturers watch?

Three pending or recent FCC changes could widen the FCC robot ban’s effect on equipment you buy. They do not create a general shutdown requirement for previously authorized robots, but they can affect modifications, replacement equipment and future procurement. The first is a component rule. According to Wiley’s October 27, 2026 Covered List roundup, since October 13, 2026 devices are barred from authorization if they incorporate “logic-bearing components” made by entities specifically identified on the Covered List. The bar applies only where the named entity that made the component would itself be barred from authorization for the end product in question, so it is scoped by equipment category. Producers affected only by a sector wide foreign production listing, such as the robot entry, are not automatically named covered entities, and the FCC’s FAQ confirms they are not “identified on the Covered List.”

The second is a proposal. The FCC’s Third Further Notice of Proposed Rulemaking, which CSIS reports was published in August 2026, would split the list into producer based and location based categories and push restrictions deeper into the supply chain “through hardware and software bills of materials.” It is a proposal, not a rule, but it signals that a software bill of materials request from your vendor is not an exotic ask.

The third is the waiver calendar. Intel’s hardware relief runs one year from October 22, 2026, while the general software waiver runs to at least January 1, 2029. The Conditional Approval window for producers closes January 1, 2028. Put those three dates on the same page as your robot replacement cycle. If you sell connected equipment into Europe as well, the same discipline applies to the EU incident reporting duties we covered in the Cyber Resilience Act 24 hour clock.

There is one exemption worth knowing if you also sell to the government. The FCC says importation, marketing or sale exclusively to the federal government or its agencies “is entirely exempt” from the Covered List restrictions. That does not extend to a contractor’s own plant equipment, and defense suppliers should read it alongside the data handling duties in our CMMC and AI guide for small defense contractors.

10. A 60 day plan for small manufacturers

The most useful response to the FCC robot ban is a short, documented review of every mobile robot you own or plan to buy. The inventory and vendor letters can usually be done internally with one owner and a spreadsheet. Close questions about authorization, origin or modifications may need specialist review.

Days 1 to 15: inventory. List every AMR, AGV, mobile manipulator, autonomous cleaner and security robot, plus anything on order or in a 2027 budget. For each, record the make, model, exact delivered configuration, FCC ID or Supplier’s Declaration of Conformity information, original authorization date, country of manufacture, any applicable exemption or Conditional Approval and its scope, modification history, firmware version, network connection and the data it collects. A brand name or a generic statement that a robot is “FCC compliant” answers none of these. Certified devices can be checked in the FCC equipment authorization database; devices authorized by declaration have no FCC ID, so ask the seller for the compliance information.

Days 16 to 30: vendor letters. Ask each vendor in writing whether the model meets the definition, whether it was authorized before July 28, 2026, whether it is a domestic end product under both the 65 and 75 percent tests, whether the vendor holds or has applied for a Conditional Approval, how long it will support the model with software and identical spare parts, and who signs and delivers updates. Keep the answers. They are evidence of diligence if a customer, insurer or auditor asks.

Days 31 to 45: risk review. For robots that stay, run the questions from section 8: data collected, remote access paths, update control, model or navigation behavior on failure, and network segmentation from production systems. Record the result in your AI system inventory alongside other AI driven tools. For any robot you plan to replace, schedule the R15.06-2025 or R15.08 risk assessment as part of the project, not after it.

Days 46 to 60: contracts and budget. For new purchases, require the vendor to warrant that the exact delivered configuration satisfies applicable FCC equipment authorization requirements and, where necessary, is within a valid Conditional Approval or other applicable exemption, with a remedy if that status is lost, a commitment on update support, and a price adjustment clause that addresses section 232 outcomes. Stock identical spares for critical fleet components. Note January 1, 2028, January 1, 2029 and late April 2027 in the capital plan. This is a credible baseline, not legal advice on a specific product, and any purchase that turns on a close reading of the definition deserves a written vendor position or counsel review.

Talk to Ross about your AI governance needs

Every business has different AI governance requirements. Let us talk about yours.

Contact Dynamic Comply

Frequently Asked Questions

What is the FCC robot ban?

It is the FCC’s July 28, 2026 addition of foreign produced advanced robotic devices to its Covered List. New foreign produced models of mobile robots, such as AMRs, humanoids and quadrupeds, generally cannot enter the US market unless they obtain a Department of War Conditional Approval and satisfy the applicable FCC equipment authorization requirements, subject to narrow exceptions such as testing imports and sales to the federal government. Models authorized before July 28, 2026 can still be used and sold.

Does the FCC robot ban cover AGVs and fixed robot arms?

The FCC says AGVs may be covered even if they follow predefined paths, because they operate at a distance from a human operator based on commands or sensor data. Fixed, stationary robots such as articulated arms, SCARA, delta and gantry robots are expressly excluded. A robot arm mounted on a mobile base is not a fixed robot and is generally within the definition if all its technical elements are met. The definition does not require AI; conventional control software can satisfy it.

Can I keep using and updating foreign made robots I already own?

Yes. The FCC says the listing does not restrict use of previously authorized robots, and FCC Public Notice DA 26-789 allows software and firmware updates that mitigate harm to U.S. consumers until at least January 1, 2029. Repairs and replacement with identical parts are allowed, but non identical hardware changes need a configuration specific analysis and may need separate FCC relief.

How do I know if a robot counts as foreign produced?

The FCC uses the Buy American domestic end product test in 48 CFR 25.101(a). A robot must be manufactured in the United States with domestic components above 65 percent of component cost for deliveries through 2028 and 75 percent from 2029, counting off the shelf parts. The brand or nationality of the seller does not matter.

Who can apply for an FCC Conditional Approval for a robot, and by when?

Any entity involved in producing the robot can apply, and an approval can cover a class of robots. Applications go to the FCC by email as a machine readable PDF and are forwarded to the Department of War, and they must be filed by January 1, 2028. As of November 6, 2026 the FCC showed 15 robot approval listings, including OMRON and ABB mobile platforms.

Did the October 28 proclamation impose new robotics tariffs?

No. The October 28, 2026 section 232 proclamation directs negotiations on robotics, industrial machinery and their components, with a progress update due within 180 days, rather than imposing a new tariff schedule. It reserves possible tariffs, duties, quotas or fees, and it does not establish that a particular robot import is free of other existing duties.

About the author

Ross J. is the founder of Dynamic Comply, an AI governance, compliance, and cybersecurity consulting firm based in Leesburg, Virginia. He brings more than 15 years of federal cybersecurity experience across the Department of State, the Department of Defense, and the Department of Homeland Security, and holds the CGRC certification along with credentials as a GSDC AI Compliance Lead Implementer and Auditor and Certified Ethical Hacker.

This article is provided for general informational purposes and reflects the state of the law as of November 2026. It is not legal advice. Regulations in this area are changing quickly. Confirm current requirements and consult qualified counsel before making decisions for your organization.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *